Soil Remediation System


RET On-site Soil Remediation System

The RET Soil Remediation System removes hydrocarbons from the effected soil area, recovers those hydrocarbons for forward uses, and returns the cleaned soil back to the original site.

The complete process can take place on-site. Systems can be of static or mobile construction and can easily be scaled up or down. Applications for this system range from industrial and post industrial site clean-up, to drill cuttings, to land based oil / hydrocarbon spillages, to brownfield sites.

The system is very durable and able to operate in the most demanding situations and environments. A typical process train could process 50 tons per hour. Multiple trains can process 1000’s of tons per day.

The system uses a combination of mechanical and chemical technologies that cleans 100% of the contaminants from the cuttings, sand grains, or contaminated soil.

Process

The process involves separating the contaminant away from the cutting, sand grain or soil, allowing the oil and other contaminants to be collected or remediated.

The remaining water and chemical are separated from the contaminated particle and recycled into the treating process. This closed loop system eliminates polluted discharges of water and other wastes, not generating any tailings stream.

Clean particles are the end product of this process and are obtained without creating volatile emissions or the use of solvents. This is an energy and water efficient process with low capital costs.

Beach Sand Before and After Treatment

Drill Cuttings Before and After Treatment (0.05%THC)